环湃机械

中文English

Mobile/WhatsApp:0086 13722990009 Tel:0086 311 87820292

News

Location:Home > News

Daily maintenance measures for flour milling machine

Views :   AddTime : 30th September,2022

Daily maintenance measures for flour milling machine
The maintenance measures are as follows:
1, often check the tightness of the belt, the belt too loose will reduce the transmission efficiency and the effect of the grinding effect; tight is easy to cause heat, in the bearing, increase power consumption, reducing the life of the belt.
 
2, often check the start of the flour machinery, should always check the gas circuit, gas pressure and dynamic components of the timing belt.
 
3, should always check the temperature of the bearing, if the temperature is too high, find the cause in time, take appropriate measures, if the circumstances are serious, stop the inspection.
 
4, check the circuit in time, check once every six months, according to the appropriate temperature of the engine oil, or the choice of other similar viscosity of the hydraulic oil, it is necessary to remove the oil path of impurities in time.
 
5, also need to change the roller regularly and orderly, the roller can not be replaced too much. Each light roller is tapered and accurate to meet specified requirements and the surface roughness is uniform. When changing the grinding roller, adjust the rolling distance according to the system required by the flour machinery.
 
6, all kinds of transmission components must be reliably fixed, special tools must be used for disassembly or installation, and it is forbidden to hit directly with tools such as hammers.
 
It is usually maintained and our flour machine has a longer service life.

Send Inquiry